Additional Support Information#
All support for this design is through BeagleBoard.org community at BeagleBoard.org forum.
Certifications and export control#
Export designations#
HS: 8471504090
US HS: 8543708800
EU HS: 8471707000
Hardware Design#
You can find all BeagleBone AI-64 hardware files here under the hw folder.
Production board boot media#
Software Updates#
Follow instructions below to download the latest image for your BeagleBone AI-64:
Go to BeagleBoard.org distro page.
Filter Software Distributions for BeagleBone AI-64 from dropdown and download the image.
Fig. 304 Filter Software Distributions for BeagleBone AI-64#
Tip
You can follow the Update board with latest software guide for more information on flashing the downloaded image to your board.
To see what SW revision is loaded into the eMMC check /etc/dogtag. It should look something like as shown below,
root@BeagleBone:~# cat /etc/dogtag
BeagleBoard.org Debian Bullseye Xfce Image 2022-01-14
RMA Support#
If you feel your board is defective or has issues, request an Return Merchandise Application (RMA) by filling out the form at http://beagleboard.org/support/rma . You will need the serial number and revision of the board. The serial numbers and revisions keep moving. Different boards can have different locations depending on when they were made. The following figures show the three locations of the serial and revision number.
Troubleshooting video output issues#
Warning
When connecting to an HDMI monitor, make sure your miniDP adapter is active. A passive adapter will not work. See miniDP to HDMI accessories section for tested cables list.
Getting Help#
If you need some up to date troubleshooting techniques, you can post your queries on link: BeagleBoard.org forum
Change History#
This section describes the change history of this document and board. Document changes are not always a result of a board change. A board change will always result in a document change.
Document Change History#
This table seeks to keep track of major revision cycles in the documentation. Moving forward, we’ll seek to align these version numbers across all of the various documentation.
Rev |
Changes |
Date |
By |
|---|---|---|---|
0.0.1 |
AI-64 initial prototype |
September 2021 |
James Anderson |
0.0.2 |
AI-64 final prototype |
December 2021 |
James Anderson |
0.0.3 |
AI-64 initial production release |
June 9, 2022 |
Deepak Khatri and Jason Kridner |
Board Changes#
Be sure to check the board revision history in the schematic file in the BeagleBone AI-64 git repository . Also check the issues list .
Rev B#
We are starting with revision B based on this being an update to the BeagleBone Black AI. However, because this board ended up being so different, we’ve decided to name it BeagleBone AI-64, rather than simply a new revision. This refers to the Seeed release on 21 Dec 2021 of “BeagleBone AI-64_SCH_Rev B_211221”. This is the initial production release.
Mechanical Details#
Dimensions and Weight#
Parameter |
Value |
|---|---|
Size |
104 * 83* 37 mm |
Max heigh |
23 mm |
PCB Size |
102.5*80*2.0 mm |
PCB Layers |
14 layers |
PCB Thickness |
2.0 mm |
RoHS compliant |
Yes |
Gross Weight |
249g |
Net Weight |
193g |
Silkscreen and Component Locations#
Fig. 305 Board Dimensions#
Fig. 306 Top silkscreen#
Fig. 307 Bottom silkscreen#
Pictures#
Fig. 308 BeagleBone AI-64 front#
Fig. 309 BeagleBone AI-64 back#
Fig. 310 BeagleBone AI-64 back with heatsink#
Fig. 311 BeagleBone AI-64 front at 45° angle#
Fig. 312 BeagleBone AI-64 back at 45° angle#
Fig. 313 BeagleBone AI-64 back with heatsink at 45° angle#
Fig. 314 BeagleBone AI-64 ports#
